Section 4: Operations; Operation Safety; Control Panel - Grizzly G0667X Owner's Manual

SECTION 4: OPERATIONS

Operation Safety

To reduce the risk of
serious injury when using
this machine, read and
understand
manual before beginning
any operations.
Damage to your eyes and lungs could result
from using this machine without proper pro-
tective gear. Always wear safety glasses and
a respirator when operating this machine.
Loose hair, clothing, or
jewelry could get caught
in machinery and cause
serious personal injury.
Keep these items away
from moving parts at all
times to reduce this risk.
NOTICE
If you have never used this type of machine
or equipment before, WE STRONGLy REC-
OMMEND that you read books, trade maga-
zines, or get formal training before begin-
ning any projects. Regardless of the con-
tent in this section, Grizzly Industrial will
not be held liable for accidents caused by
lack of training.
g0667X high precision Vs Vertical Mill
refer to Figure 20 and the descriptions below to
understand the different functions of the control
panel.
this entire
A. Spindle Speed Readout: displays the spin-
B. Emergency Stop Button: disconnects power
C. Motor Start Button: starts the spindle motor
D. Coolant Switch: turns the coolant pump
E. Spindle Direction Switch: starts spindle
F.

Control Panel

A
F
d
E
Figure 20. Control panel identification.
dle speed—top numbers are for the high
speed range, and the bottom numbers are for
the low speed range.
to the spindle and coolant pump motors. this
button doEs not disconnect the machine
from power.
only—use the spindle direction selector to
start spindle rotation.
on/oFF.
rotation, changes spindle direction, and stops
spindle rotation.
Spindle Speed Dial: Controls the variable
speed of the spindle.
B
C
-23-