Section 4: Operations; Control Panel - Grizzly G8689 Owner's Manual

SECTION 4: OPERATIONS

Damage to your eyes, lungs, and ears could
result from using this machine without
proper protective gear. Always wear safety
glasses, a respirator, and hearing protection
when operating this machine.
Loose hair and cloth-
ing could get caught in
machinery and cause seri-
ous personal injury. Keep
loose clothing and long
hair away from moving
machinery.
NOTICE
If you have never used this type of machine
or equipment before, WE STRONGLY REC-
OMMEND that you read books, trade maga-
zines, or get formal training before begin-
ning any projects. Regardless of the con-
tent in this section, Grizzly Industrial will
not be held liable for accidents caused by
lack of training.
G8689 Mini Mill (Mfg. 8/06+)

Control Panel

It is vital that you become familiar with the control
panel before operating the Model G8689. Three
separate switches control the power on the mill
(see Figure 10).
1
Figure 10. Control panel components.
1. POWER INDICATOR Light: Shines when the
system power is ON.
2.
SPINDLE ON & RPM Control Knob: Turns
the spindle ON and controls the spindle
RPM.
3. SYSTEM ON Toggle Switch: This toggle
switch delivers power to the system.
4. Fuse Socket: Houses a 5 Amp system fuse.
5. EMERGENCY STOP Button: Immediately
disconnects power to the system. Once
pressed, this button must be released to allow
use of the SYSTEM ON Toggle Switch.
Note: After using the EMERGENCY STOP
Button it will be necessary to reset the
SPINDLE ON & RPM Control Knob and the
SYSTEM ON Toggle Switch.
2
3
4
5
-17-