Control Panel - Grizzly G0823 Owner's Manual

K. Headstock Elevation Crank: Raises and
lowers headstock along column.
L. Quill Lock: Locks quill in position. Typically
used in tandem with fine downfeed handwheel.
K
Figure 3. Headstock controls (left).
Table
M
Figure 5. Table controls (from below).
M. Table Lock Handles: Secure table assem-
bly in place along column. Loosen to raise
or lower table, or to rotate table assembly
around column.
N Pivot Lock Handle: Allows table to rotate
freely when loosened.
O. Table Elevation Crank: Changes elevation
of table assembly.
Model G0823 (Mfd. Since 2/16)
L
N
O

Control Panel

P
S
Figure 4. Control panel.
P. FORWARD Button: Rotates spindle in clock-
wise direction. Begins downward auto-feed
function when auto-feed is engaged.
Q. REVERSE Button: Rotates spindle in coun-
terclockwise direction. Begins upward auto-
feed function when auto-feed is engaged.
R. POWER Indicator Light: Illuminates when
machine is connected to power.
S. STOP Button: Stops motor function.
T. E-STOP Button: Immediately cuts power to
motor and control panel when pressed. Twist
button clockwise to reset.
Q
R
T
-5-