Icon Legend; Assembly; Camera Head Routing - RIDGID SeeSnake nanoReel Operator's Manual

Icon Legend

Table 2
micro CA-300 Icons
Icon

Assembly

WARNING
To reduce the risk of serious injury, properly assemble the
nanoReel in accordance with these procedures�

Camera Head Routing

1� Set the unit on a level surface and lay it on its back�
2� Unfasten the case latches on either side of the
nanoReel (See Figure 4)�
Figure 4 – Unlatching the nanoReel Case
3� Open the front case and locate the camera head in
the push cable drum�
Meaning
Return Key
Shutter Key
Select Key
Arrow Keys
Power Key
Rotate Image Key
Menu Key
4� Route the camera head out through the push cable
guide in the front of the case (See Figure 5).
5� Secure the camera head in the provided clip (See
Figure 6).
6� Close and relatch the case�
Figure 5 – Routing the Camera Head
Figure 6 – Camera Head Properly Routed
TM
English – 7