Honeywell HD41 Quick Installation Manual

Performance Series
High Resolution Indoor Fixed
Mini-Dome Camera
HD41

Quick Installation Guide

Key Features

• 1/3" CCD Image sensor. •
• 5th Generation DSP chip. •
• Sense-Up / DSS. •
• High Speed Shutter. •
• High Resolution images. •

1. Safety Instructions

BEFORE OPERATING OR INSTALLING THE UNIT, READ AND FOLLOW
ALL INSTRUCTIONS. AFTER INSTALLATION, retain the safety and
operating instructions for future reference
1. HEED WARNINGS - Adhere to all warnings on the unit and in the operating
instructions.
2. INSTALLATION
• Install in accordance with the manufacturer's instructions.
• Installation and servicing should be performed only by qualified and
experienced technicians to conform to all local codes and to maintain your
warranty.
• Do not install the unit in an extremely hot or humid location, or in a place
subject to dust or mechanical vibration. The unit is not designed to be
waterproof. Exposure to rain or water may damage the unit.
• Any wall or ceiling mounting of the product should follow the manufacturer's
instructions and use a mounting kit approved or recommended by the
manufacturer.
3. POWER SOURCES - This product should be operated only from the type of power
source indicated on the marking label. If you are not sure of the type of power
supplied to your facility, consult your product dealer or local power company.
WARNING
This device is configured for 12 VDC operation only, do NOT
connect to higher voltage. Use only with NRTL approved 12 VDC power supplies. To
prevent potential ground loop issues, a separate PSU should be used for each
camera. A multiple output PSU may be used if the multiple output PSU has isolated
and protected (2A MAX) outputs.
4. HEAT - Situate away from items that produce heat or are heat sources such as
radiators, heat registers, stoves, or other products (including amplifiers).
5. WATER/MOISTURE - This is an indoor-rated camera. Do not use this unit near water
or in an unprotected outdoor installation, or any area classified as a wet location.
6. MOUNTING SYSTEM - Use only with a mounting system recommended by the
manufacturer, or sold with the product.
7. ATTACHMENTS - Do not use attachments not recommended by the product
manufacturer as they may result in the risk of fire, electric shock, or injury to persons.
8. ACCESSORIES - Only use accessories specified by the manufacturer.
9. CLEANING - Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for
cleaning.
10. SERVICING - Do not attempt to service this unit yourself as opening or removing
covers may expose you to dangerous voltage or other hazards. Refer all servicing to
qualified service personnel.
11. REPLACEMENT PARTS - When replacement parts are required, be sure the service
technician has used replacement parts specified by the manufacturer or have the
same characteristics as the original part. Unauthorized substitutions may result in
fire, electric shock or other hazards.
Day and Night capability (SDN or electronic).
0.3 lux minimum illumination.
DC Auto Iris Vari-Focal lens, 2.8 mm - 12 mm.
620 TV lines Horizontal Resolution.
No Noise or Ghosting effect with DNR.
800-11941 - C - 06/2012
1
RISK OF ELECTRIC
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE THE COVER.
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
FCC Compliance Statement
Information to the user: This equipment has been tested and found to comply with the limits
for a Class A digital device. Pursuant to part 15 of the FCC Rules, these limits are designed
to provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user will be required
to correct the interference at his own expense.
CAUTION Changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to
operate the equipment.
Canadian Compliance Statement
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la Classe A est conforme à la norme NMB-003 du Canada.
Warranty and Service
Subject to the terms and conditions listed on the Product warranty, during the warranty
period Honeywell will repair or replace, at its sole option, free of charge, any defective
product returned prepaid.
In the event you have a problem with any Honeywell product, please call Customer Service
at 1.800.796.CCTV (North America only) for assistance or to request a Return Merchandise
Authorization (RMA) number.
Be sure to have the model number, serial number, and the nature of the problem available
for the technical service representative.
Prior authorization must be obtained for all returns, exchanges, or credits. Items shipped to
Honeywell without a clearly identified Return Merchandise Authorization (RMA)
number may be refused.
2. Precautions
Precautions for Use
• Read and keep these instructions.
• This camera should be installed by qualified personnel only.
• There are no user serviceable parts inside. Do not disassemble this camera other
than to make initial adjustments.
• Do not touch the camera lens, dome or bezel (front glass plate).
• Do not drop the camera or subject it to physical shock.
• Do not use a strong or abrasive detergent when cleaning the camera.
• Use a UL approved regulated 12 VDC power supply.
• Use an appropriate low voltage power cable to prevent fire or electrical shock.
• Please ensure that your installation area can support the weight of the camera.
Operating Conditions
• Avoid aiming the camera towards an extreme light source (for example, light fixtures)
to prevent damaging the CCD. Do not view direct sunlight with the camera.
• This camera is rated for indoor operation; do not expose this camera to rain or
moisture.
• Avoid operating or storing the unit in the following locations:
• Extremely humid, dusty, hot/cold environments; extreme temperature
conditions where the operating temperature is outside the recommended
range of 14°F to 122°F (-10°C to +50°C). Be especially careful to provide
ventilation when operating under high temperatures.
• Close to sources of powerful radio or TV transmitters.
• Near a cooling or heating device.
• Close to fluorescent lamps or objects reflecting light.
• Under unstable light sources (may cause flickering).
3. Package Includes
• One Camera
• One Configuration Manual
• Mounting screws (x2)

4. Cable Connections

THIS SYMBOL INDICATES THAT
CAUTION
DANGEROUS VOLTAGE
CONSTITUTING A RISK OF
SHOCK
ELECTRIC SHOCK IS PRESENT
DO NOT OPEN
WITHIN THE UNIT.
THIS SYMBOL INDICATES THAT
IMPORTANT OPERATING AND•
MAINTENANCE INSTRUCTIONS
ACCOMPANY THIS UNIT.
PERSONNEL.
• One Quick Install Guide (this document)
• Local video monitor output and power
cable
800-11941 - C - 06/2012