Section 5: Operations; Basic Controls; General - Grizzly G0672 Owner's Manual

SECTION 5: OPERATIONS

To reduce your risk of
serious injury, read this
entire
using machine.
Eye injuries, respiratory problems, or hear-
ing loss can occur while operating this
tool. Wear personal protective equipment to
reduce your risk from these hazards.
Keep hair, clothing, and
jewelry away from mov-
ing parts at all times.
Entanglement can result
in death, amputation, or
severe crushing injuries!
If you are not experienced with this type
of machine, WE STRONGLY RECOMMEND
that you seek additional training outside of
this manual. Read books/magazines or get
formal training before beginning any proj-
ects. Regardless of the content in this sec-
tion, Grizzly Industrial will not be held liable
for accidents caused by lack of training.
Model G0671/G0672/G0673 (Mfd. Since 6/17)
manual BEFORE

Basic Controls

This section covers the basic controls used during
routine operations:
ON Button: Starts the motor.
OFF Button: Stops the motor.
Figure 37. ON/OFF button locations.

General

Operating your Model G0671/G0672/G0673 is
simple and straightforward. Blast gates located
at each of the woodworking machines control the
airflow from the woodworking machine to the dust
collector. If a machine is not being used, keep
the blast gate closed to maintain higher levels of
efficiency throughout the system.
DO NOT use the dust collector for any
other purpose besides collecting dust from
connected woodworking machines. A dust
collector should NEVER be used as a shop
vacuum. For safest use, wear a respirator
and use an air cleaner in addition to the
dust collector.
ON
OFF
-35-