Disassembly and Reassembly
3-15 Pressure Roller
1. Before you remove the roller, you should
remove:
-All covers (see pages 3-2, 3-3,3-4)
-Upper frame (see page 3-9)
-Fuser (see page 3-8)
2. Remove the roller.
3-16 Pickup Roller
1. Before you remove the pickup roller, you should
remove:
-All covers (see pages 3-2, 3-3,3-4)
-Upper frame (see page 3-9)
2. Remove one screw, pull the pick-up bushing
slightly toward you, then rotate it clock-wise.
3-10
3. Remove the E-ring at the right end of the roller.
4. Remove a pin passing through a shaft to take
out the pick-up roller, then push the roller shaft
to the right. Lift the left side of the roller, then
take it out.
Samsung Electronics