Sensor Board - Samsung ML-5200A Service Manual

Disassembly and Reassembly

3-8 Sensor Board

1. Before you remove the sensor board, you should
remove:
-All covers (see pages 3-2, 3-3,3-4)
-SMPS (see pages 3-4)
-Engine Control board(see pages 3-5)
2. Remove two screws,from the sensor board, then
remove the board.
3-9 Gear Bracket
1. Before you remove the gear bracket, you should
remove:
-All covers (see pages 3-2, 3-3,3-4)
2. Remove six screws securing the gear bracket,
unplug the connector from the motor, then
remove the gear bracket.
3-6 Samsung Electronics