Disassembly and Reassembly
3-16 Upper Frame
1. Before you remove the upper frame, you should
remove:
-All covers (see pages 3-1, 3-4)
-Gear bracket (see page 3-14)
-HVPS board (see page 3-16)
2. Remove six screws, then remove two screws
securing the solenoid.
3-17 Pressure Roller
1. Before you remove the roller, you should
remove:
-All covers (see pages 3-1, 3-4)
-All boards (see pages 3-3, 3-5, 3-6, 3-8)
-Upper frame (see page 3-10)
-Fuser (see page 3-9)
2. Remove the roller.
3-10
3. Unlatch the front end of the frame, then lift it up.
Solenoid
Samsung Electronics