Disassembly and Reassembly
3-9 Joint Board
1. Before you remove the joint board, you should
remove:
-All covers (see pages 3-1, 3-4)
-SMPS (see page 3-5)
2. Unplug all connectors from the joint board,
remove three screws, then remove the joint
board.
3-10 Sensor Board
1. Before you remove the sensor board, you should
remove:
-All covers (see pages 3-1, 3-4)
-SMPS (see page 3-5)
2. Remove two screws, unplug all connectors from
the sensor board, then remove the board.
3-6
Samsung Electronics