Honeywell STT750 SmartLine User Manual page 3

This manual is a detailed how to reference for installing, piping, wiring, configuring, starting up,
operating, maintaining, calibrating, and servicing Honeywell's family of STT750 Temperature
Transmitters. Users who have a Honeywell STT750 SmartLine Temperature Transmitter
configured for HART protocol are referred to the STT750 SmartLine Series HART Option User's
Manual, document number 34-TT-25-15.
The configuration of your Transmitter depends on the mode of operation and the options selected
for it with respect to operating controls, displays and mechanical installation. This manual
provides detailed procedures to assist first-time users, and it further includes keystroke
summaries, where appropriate, as quick reference or refreshers for experienced personnel.
To digitally integrate a Transmitter with one of the following systems:

For the Experion PKS, you will need to supplement the information in this document with the
data and procedures in the Experion Knowledge Builder.

For Honeywell's TotalPlant Solutions (TPS), you will need to supplement the information in this
document with the data in the PM/APM SmartLine Transmitter Integration Manual, which is
supplied with the TDC 3000 book set. (TPS is the evolution of the TDC 3000).
Release Information:
STT750 SmartLine Temperature Transmitter User Manual, Document # 34-TT-25-13,
Rev 1, August 2015
Rev.2 March 2016
Rev.3 November 2016
Rev.4 September 2017
Revision 4
About This Manual
st
1 Release
CVD, W5W26, Soft DO, Housing w/o plug, angle Brackets,
NAMUR 89 Approval, Ni 120 & Cu 10 inputs added
and Display menus updated.
Roxspur Cu100 and GOST sensor types added
Control drawing updated to Rev.D, EAC, KOSHA and
Marine approvals/certs and mtg dwgs updated.
STT750 Temperature Transmitter User's Manual
Page iii