Tripp Lite SNMPWEBCARD Installation Instructions Manual page 19

Features
PS/2 Port: Use this port to connect a Tripp Lite ENVIROSENSE environmental
A
sensor to provide remote temperature/humidity monitoring and a dry contact
interface to control and monitor alarm, security and telecom devices.
Contact Tripp Lite Customer Support at (773) 869-1234 for ordering
information. Note: Do not connect a keyboard or mouse to this port.
Mini-DIN Serial Port: Use this port to provide a direct terminal connection to
B
a computer with a terminal emulation program. A serial cable (part number
73-1025) is included with the SNMPWEBCARD. If you need to order a
replacement cable, contact Tripp Lite Customer Support at (773) 869-1234.
Ethernet Port: Use this RJ-45 jack to connect the SNMPWEBCARD to the
C
network with a standard Ethernet patch cable. The Link LED
LED indicate several operating conditions, as shown in the table below.
C2
Does not support PoE (Power Over Ethernet) applications.
SNMPWEBCARD Operating Conditions
Link LED Color
C1
Off
Flashing Amber
Flashing Green
Status LED Color
C2
Off
Steady Green
Flashing Amber
201203126 933179.indb 19
B
A
A B
No Network Connection
100 Mbps Network Connection
10 Mbps Network Connection
Card Not Initialized
Card Initialized and Operational
Error - Card Not Initialized
19
C
C1 C2
C1 C2
and Status
C1
4/5/2012 5:11:08 PM