Stacker Error; Thermic Fuse Fault - Electrolux IC4 4819 FFS Service Manual

51

STACKER ERROR

A bad operation of the stacker is detected.
Check:
• the operation of the DP41, DP42 and DP43
detectors.
• the mechanical operation of each function
of the stacker (motion, detection, opening,
closing...).
Once the problem solved, press 'Validation'
button to start again the machine.

THERMIC FUSE FAULT

A overheating > 240°C is detected.
1. Put the machine in 'Without feeding' mode,
2. Lower the heating temperature using wet
linen.
3. Press 'Validation' button to start again
the machine.
4. Stop the machine and change the F2
thermal fuse.
12
Troubleshooting
13. STACKER ERROR
Read instructions in the manual
or contact your technician
14. THERMIC FUSE FAULT
Read instructions in the manual
or contact your technician
Service
Manual
04102011/GB
06.2009