Honeywell HC900 User Manual page 69

Fixed Fixed
Address Register
(hex) (decimal)
1F10 7953
1F12 7955
1F14 7957
1F16 7959
1F3A 7995
1F3B 7996
1F3C 7997
Revision 13
April 2017
Parameter
Jog Segment
Loop Start
Loop End
Repeats
Time Units**
Ramp Units**
Guaranteed Soak Type **
HC900 Process Controller Communications User Guide
Parameters accessible with Function Code 03, 06,10h
Access Notes
R/W Floating Point
Writing to this register is only permissible in
the reset or ready mode
R/W Floating Point
0 indicates no loop.
Writing to this register is only permissible in
the reset or ready mode
R/W Floating Point
0 indicates no loop.
Writing to this register is only permissible in
the reset or ready mode
R/W Floating Point
0 indicates loop forever.
Writing to this register is only permissible in
the reset or ready mode
R/W Bit Packed
Bit 0: Reserved
1: minutes
2: hours
3-15: Unused
R/W Bit Packed
Bit 0:
Bit 1-15: Unused
Writing to this register is only permissible in
the reset or ready mode
R/W Bit Packed
For selection of Soak (or Hold) guarantee –
Per Segment (requiring selection per
segment in a table)
Bit 0: per segment
1: all soaks
2: all segments
3-15: Unused
None if none of the bits is set
Writing to this register is only permissible in
the reset or ready mode
Set Point Programmer
0:Time; 1:Rate
61