Licensing Requirements For Object Tracking - Cisco Nexus 3000 Series Configuration Manual

Chapter 14 Configuring Object Tracking
S e n d d o c u m e n t c o m m e n t s t o n e x u s 3 k - d o c f e e d b a c k @ c i s c o . c o m

Licensing Requirements for Object Tracking

The following table shows the licensing requirements for this feature:
Product License Requirement
Cisco NX-OS Object tracking requires no license. Any feature not included in a license package is bundled with the Cisco
NX-OS system images and is provided at no extra charge to you. For a complete explanation of the Cisco
NX-OS licensing scheme, see the Cisco NX-OS Licensing Guide.
Guidelines and Limitations
Object tracking has the following configuration guidelines and limitations:
•
•
•
Default Settings
Table 14-1
Table 14-1
Parameters
Tracked Object VRF
Configuring Object Tracking
This section includes the following topics:
•
•
•
•
•
•
•
If you are familiar with the Cisco IOS CLI, be aware that the Cisco NX-OS commands for this feature
Note
might differ from the Cisco IOS commands that you would use.
Supports up to 500 tracked objects.
Supports Ethernet, subinterfaces, tunnels, port channels, loopback interfaces, and VLAN interfaces.
Supports one tracked object per HSRP group.
lists the default settings for object tracking parameters.
Default Object Tracking Parameters
Configuring Object Tracking for an Interface, page 14-4
Configuring Object Tracking for Route Reachability, page 14-5
Configuring an Object Track List with a Boolean Expression, page 14-6
Configuring an Object Track List with a Percentage Threshold, page 14-7
Configuring an Object Track List with a Weight Threshold, page 14-8
Configuring an Object Tracking Delay, page 14-10
Configuring Object Tracking for a Nondefault VRF, page 14-12
Cisco Nexus 3000 Series NX-OS Unicast Routing Configuration Guide, NX-OS Release 5.0(3)U1(1)
Licensing Requirements for Object Tracking
Default
Member of default VRF
14-3