To Change The Fm Reception Mode; Rds (Radio Data System) Reception - Hitachi AX-M76E Instruction Manual

3. Press the memory button (PROG) on the remote control to store the station. After 1
second, the display returns to the broadcast frequency display.
4. Repeat above steps 1 to 3 for each station you want to store in memory with a preset
number.
If the system is unplugged or if a power failure occurs, the preset stations will not be erased.

To change the FM Reception Mode

When you are tuned into a FM stereo broadcast, "FM ST. " will be displayed and you can hear
stereo effects.
If a FM stereo broadcast is hard to receive or noisy, you can select MONO by pressing the
mode button (MODE) and the "FM ST" will not displayed. Reception will be improved, but
you will lose any stereo effect.
To restore the stereo effect, press the mode button (MODE) and the "FM ST" will be
displayed.

RDS (Radio Data System) Reception

Many FM stations are broadcasting added data compatible with RDS. This radio set offers
convenient functions using such data.
• PS (Program Service Name)
When an RDS station is received, the "RDS" and the name of that station will be
displayed.
When RDS display button (DISPLAY) on the remote control is pressed during PS
display, the CT is displayed for 3 seconds, then PS display returns.
• PTY (Program Type)
Program type identification signal. (Example: News, Rock, Classical music.)
• CT (Clock Time System)
The CT system may not properly operate in areas where RDS CT service is not available.
Once CT service is received, the CT system keeps operating. "RDS CLOCK" is displayed
in areas where no CT services are available.
• Changing Display
During PS display, press the RDS display button (DISPLAY) on the remote control
repeatedly to select the CT, PTY or Frequency. They will be displayed for 3 seconds,
then the PS display returns.
GB
17