FM Operation
Switching from DAB to FM Mode
To switch the unit to FM mode, Press MODE repeatedly to select FM mode. The display will
show the frequency.
GB
Auto Scan
/SCAN until the tuner starts searching for a station. To scan down the frequency
Press
band, press and hold
automatically.
The search may not stop at a station with a very weak signal.
Manual Scan
To search for FM stations manually, press
reached.
With FM radio it may be necessary to fine tune each station by pressing
press/tap will adjust the frequency by 0.05MHz. If reception is still poor adjust the position of the
aerial or try moving the radio to another location.
Scan Setting
This is a scanning option to scan all stations, or just scan stations with strong signal.
1. Press and hold MENU/INFO on the unit or press MENU on the remote control and then
press
the remote control to confirm.
2. Press
the unit or ENTER on the remote control to confirm.
22
/SCAN. Once a station has been found, the scanning will stop
to select <Scan setting>. Press /ENTER/PAIR on the unit or ENTER on
to select <All stations> or <Strong stations only>. Press /ENTER/PAIR on
repeatedly until your desired frequency is
repeatedly. Each