Fm Operation; Auto Scan; Manual Scan; Audio Mode - Hitachi AXM525E Instruction Manual

FM Operation

Press MODE repeatedly to select FM mode.

Auto Scan

Press and hold the
station has been found, the scanning will stop automatically.
The search may not stop at a station with a very weak signal.

Manual Scan

Press repeatedly until your desired frequency is reached.
With FM radio it may be necessary to fine tune each station by pressing
adjust the frequency by 0.05MHz. If reception is still poor adjust the position of the aerial or try moving the
radio to another location.

Audio Mode

Press the MONO/ST. button repeatedly to switch between STEREO or MONO modes.
When stereo mode is selected, you can override this and switch this function manually by changing it to
mono mode. This is helpful when receiving poor signal reception.

For Better Reception

Fully unwind the aerial. Extend the aerial and place it in the position that offers the best
sound reception.

Presetting Stations

You can store up to 30 of your favourite stations to the memory. This will enable you to
access your favourite stations quickly and easily.
1. To store a preset, you must first be listening to the station that you would like to save,
press MEMORY. The display will show "P - ##", and the preset number will flash.
2. Press PRESET/FOLDER
MEMORY to confirm.

Recalling a Preset Station

Press PRESET/FOLDER
The stored stations will be saved into the memory and power off will not erase it. Storing a new station into
a preset location will erase the previously stored station in that location.
buttons until the tuner starts searching for a station. Once a
to select your desired preset station number and then press
to select your desired preset station number.
repeatedly. Each press will
GB
19