Specifications; Blower Safety Warnings - Makita M4000 Instruction Manual

ENGLISH (Original instructions)

SPECIFICATIONS

Capacities
No load speed (min
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･
WARNING:
･
Switch off and remove plug from mains
before cleaning or maintenance.
･
Read the operator's manual.
･
Keep a hand away from rotating parts.
･
Keep bystanders away.
･
Wear eye protection.
･
Do not use in the rain or leave outdoors
while it is raining.
･
Only for EU countries
Do not dispose of electric equipment
together
material!
In observance
Directive,
Electronic
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an
recycling facility.
Intended use
The tool is intended for blowing dust.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated and can, therefore, also be used
from sockets without earth wire.
Model
Max. air volume
-1
)
Overall length
Net weight
Safety class
with household
of the
on Waste Electric
Equipment
environmentally compatible
END022-1

BLOWER SAFETY WARNINGS

WARNING: Read all safety warnings and all
instructions. Failure to follow the warnings and instructions
may result in electric shock, fire and/or serious injury.
Training
−
−
−
−
−
−
waste
European
Preparation
and
1. While operating the appliance, always wear
and its
substantial footwear and long trousers.
2. Do not wear loose clothing or jewellery that can be drawn
into the air inlet. Keep long hair away from the air inlets.
3. Wear protective goggles while operating.
4. To prevent dust irritation the wearing of a face
mask is recommended.
5. Before using, check the supply and extension
ENE018-1
cord for signs of damage and aging. Do not use
the appliance if the cord is damaged or worn.
ENF002-2 6. Never operate the appliance with defective
guards or shields, or without safety devices, for
example debris collector in place.
7. Only use a weather proof extension cable fitted
with a coupler according to IEC 60320-2-3.
8. It is recommended that the appliance should be
supplied via a residual current device (RCD) with
2
M4000
3
1.2 - 2.9 m /min
8,500 - 16,000
427 mm
1.5 kg
/II
Read the instructions carefully. Be familiar with
the controls and the proper use of the appliance.
Never allow children to use the appliance.
Never allow people unfamiliar with these
instructions to use
regulations may restrict the age of the operator.
Never operate the appliance while people,
especially children, or pets are nearby.
The operator or user is responsible for accidents or
hazards occurring to other people or their property.
This appliance is not indented for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given
supervision or instruction concerning use of the
appliance by a person responsible for their safety.
GEB113-2
the appliance. Local