Displaying The Clock; Sleep Timer; Setting The Daily Timer - Hitachi AXM1205E Instruction Manual

Displaying the Clock

• During standby mode, press the CLOCK button to display the clock for 90 seconds.
While the unit is on, press the CLOCK button to display the clock for 3 sconds.
•
While in iPod mode, when iPhone/iPod is connected to dock, time will show on the
•
unit display automatically until iPhone/iPod removed.

Sleep Timer

GB
Your unit can be set to switch off after a certain amount of time. This allows you to fall
asleep while listening to music, knowing your unit will switch into standby and not be on all
night.
Repeatedly press the TIMER/SLEEP button to select a sleep time from the following:
1.
When the sleep timer is active the word 'SLEEP' will be displayed.
2. To see how much sleep time is left, press the TIMER/SLEEP button. The amount of
time will be shown in the display.
To switch the sleep timer off, press TIMER/SLEEP repeatedly until 'SLEEP OFF' is
3.
displayed.

Setting the Daily Timer

You will not be able to set an alarm in ECO-POWER mode. Press the STANDBY button to
switch the unit on and then off.
In standby mode press and hold the TIMER/SLEEP button. The words 'TIMER SET' will
1.
scroll across the display.
Press the FUNCTION button to select DISC, USB, TUNER, DOCK modes. Then press
2.
the TIMER/SLEEP button.
• If you select TUNER mode make sure you have selected the radio station you want to be
woken up to first.
• If you have selected DISC mode make sure you have a CD inserted into the CD tray, if you
forget to insert a CD, the radio will swith on instead.
• If you have selected DOCK mode make sure your iPod/iPhone is inserted into the dock. If
you forget to dock your iPod/iPhone, the radio will switch on instead.
The hours will flash in the display, press the VOL + / - buttons to select the hour you
3.
would like the alarm to switch on. Then press TIMER/SLEEP.
4. The minutes will flash in the display, press the VOL + / - button to select the minute
you would like the alarm to switch on. Then press TIMER/SLEEP.
The volume level will flash in the display, press the VOL + / - button to select the
5.
volume that you would like the alarm to switch on at. The volume will gradually
increase the level you set when it switches on. Then press TIMER/SLEEP.
The alarm is now set and the
22
SLEEP 120 SLEEP 90
SLEEP OFF SLEEP 15
symbol will be displayed. The alarm will sound daily.
SLEEP 60 SLEEP 45
SLEEP 30