Location Of Control - Cisco 8845 User Manual

Cloud Voice S Service – Cisco 8845 IP Phone User Guide
1.2

Location of Control

Item
1 Handset light strip Indicates an incoming call (flashing red) or new voice message
2 Phone screen
3. Video Camera
4 Programmable
Feature buttons
and Session
buttons
5 Softkey buttons
Version 2.0
(steady red).
Shows information about your phone, including directory
number, call information (for example caller ID, icons for an
active call or call on hold) and available softkeys.
Use the camera for video calls.
Depends on the features programmed on the buttons.
Buttons illuminate to indicate status:
• Flashing amber — Ringing call. Pressing this button answers the
call.
• Solid green — May be a connected call or an outgoing call that is
not yet connected. If the call is connected, pressing this button
displays the call details or the participants of a conference call. If the
call is not yet connected, pressing this button ends the call.
•Pulsing green — Held call. Pressing this button resumes the held
call.
•Solid red — Shared line in-use remotely. Pressing this button allows
you to barge in on the call (if Barge is enabled).
•Pulsing red — Shared line call put on hold remotely. Pressing this
button resumes the held call.
Depends on how your system administrator sets up the phone,
enable softkey options displayed on your phone screen.
4
Description
© WTT HK Limited 2017