3. Removing the shipping
struts
Failure to remove the shipping
struts can result in damage to the
washing machine and to adjacent
cabinetry or appliances.
Remove the shipping struts as de-
scribed in the "Installation" section.
The following message appears in the
display:
Remove shipping struts
Confirm with the OK sensor button.
4. Starting the calibration pro-
gram
For optimum water and energy con-
sumption and excellent wash results, it
is important to calibrate the washing
machine.
To do this, the Normal program must
be run without laundry and without de-
tergent.
No other programs can be started until
calibration has been carried out.
The following message appears in the
display:
Open and run "Normal" with "Hot Plus"
without laundry.
Before using for the first time
Touch the sensor button until the
OK sensor button lights up and con-
firm this with OK.
Hot +
Turn on the water supply.
Touch the Start/Stop sensor button.
The washing machine calibration pro-
gram has started. It will take approxi-
mately 2 hours.
At the end of the program the following
message will appear in the display:
Set up complete
Take hold of the door and pull it
open.
Tip: Leave the door slightly open to al-
low the drum to dry.
Turn the program selector to the
position.
1:40
Max
OK
19