Ssxc Card-Level Indicators; Oc48/Stm16 Lr/Lh 16 Port 1550 Card; Oc48/Stm16 Lr/Lh 16 Port 1550 Slots And Connectors - Cisco ONS 15600 Reference Manual

2.3.4 SSXC Card-Level Indicators

2.3.4 SSXC Card-Level Indicators
Table 2-6
Table 2-6
Indicator
STAT
SRV

2.4 OC48/STM16 LR/LH 16 Port 1550 Card

The OC48/STM16 LR/LH 16 Port 1550 card provides 16 long-range, Telcordia-compliant, GR-253
SONET OC-48 ports per card. The ports operate at 2488.320 Mbps over a single-mode fiber span. The
OC48/STM16 LR/LH 16 Port 1550 card has four physical connector adapters with eight fibers per
connector adapter. The card supports STS-1 payloads and concatenated payloads at STS-3c, STS-12c,
STS-24c, or STS-48c signal levels.

2.4.1 OC48/STM16 LR/LH 16 Port 1550 Slots and Connectors

You can install OC48/STM16 LR/LH 16 Port 1550 cards in Slots 1 through 4 and 11 through 14. The
card provides four bidirectional OGI type connector adapters on the faceplate (angled downward), each
carrying eight fiber strands (4 transmit and 4 receive).
Cisco ONS 15600 Reference Manual, R5.0
2-8
describes the functions of the card-level LEDs on the SSXC card faceplate.
SSXC Card-Level Indicators
Color Definition
Red Indicates a hardware fault; this LED is off during normal operation.
Replace the card if the STAT LED persists. During diagnostics, the LED
will flash quickly during initialization and flash slowly during
configuration synchronization.
Green The service mode of the card. Green indicates the card is in use; off
indicates that the card can be removed for service.
Amber The service mode of the card. Amber indicates the card is in use; off
indicates that the card can be removed for service.
Chapter 2 Cards Features and Functions