Garage Doors - Honeywell Lyric User Reference Manual

Hide thumbs Also See for Lyric:
Table of Contents

Advertisement

Garage Doors

Home > Automation > Garages
Garage door operation from the Controller requires installation of a garage door control kit.
Consult your security professional for more information.
The Lyric™ Controller can remotely operate and monitor as many as four garage doors. The
system can be armed when the garage door is opened. After it is closed, the zone will be
monitored without providing burglary protection.
The Controller can automatically close garage doors if left open for more than a given time period (Close in)
or at a specified time (Close at). Garage doors can also be programmed for monitoring only.
Do not use Lyric's garage door automation with any garage door opener that lacks the
safety features required by U.S. federal safety standards (this includes any garage door
opener model manufactured before January 1, 1993). A garage door opener that cannot
detect an object and stop and reverse the door does not meet current U.S. federal safety
standards. Your garage door opener also must signal before unattended door operation.
For more information please consult your garage door opener manual.
NOTE
Press Switches on the Automation Management menu to configure new Z-Wave®
binary garage door openers. Ask your security professional for more information.
Garage Door Operation from the Lyric Controller
1.
On the Home screen, select Automation.
2. On the Automation Management menu, press Garages. The Controller displays the
Open/Closed status of your connected garage doors.
3. Select the garage door you wish to operate.
4. Press the button in the middle of the screen to open or close the garage door.
Close in
Use the keypad to set a specific time to wait before an open garage door
closes automatically (maximum 12 hours and 59 minutes). Use leading zeroes
when entering a number of hours less than 10 ("09:15" or "00:45"). Press Done
to save.
Close at
Use the keypad to set a specific time of day that an open garage door closes
automatically. Remember to specify AM or PM. Press Done to save.
Edit
Press to rename the selected garage door. Use the on-screen keypad and press
Save.
NOTE:
The Lyric Controller does not support the status LED on the garage kit's relay
module (Honeywell 5877).
IMPORTANT
37

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lcp500-lLcp500-lcLyric lcp500-lLyric lcp500-lc

Table of Contents