Cisco Aironet 1240AG Series Hardware Installation Manual page 52

Assigning Basic Settings
Click Express Setup. The Express Setup page displays.
Step 5
Figure 3-3
Enter the configuration settings you obtained from your system administrator. The configurable settings
Step 6
include:
Host Name— The host name (or system name), while not an essential setting, helps identify the
•
access point on your network. The system name displays in the titles of the management system
pages.
Configuration Server Protocol—Click on the button that matches the network's method of IP
•
address assignment.
–
–
Cisco Aironet 1240AG Series Access Point Hardware Installation Guide
3-6
D r a f t 1 A - C I S C O C O N F I D E N T I A L
Express Setup Page
DHCP—IP addresses are automatically assigned by your network's DHCP server.
Static IP—The access point uses a static IP address that you enter in the IP address field.
Chapter 3 Configuring the Access Point for the First Time
Figure 3-3 shows the Express Setup page.
OL-7293-01