•
Address: default address is 1.
•
Baud rate: select corresponding baud rate. Default value is 9600.
•
Data Bits: select corresponding data bits. Default value is 8.
•
Stop Bits: select corresponding stop bits. Default value is 1.
•
Parity: there are five options: none/odd/even/mark/space. Default
setup is none.
After completing all the settings, click Save.
In one window display mode, right click mouse (click "Fn" Button in the
front panel). The interface is shown as in
Figure 5-22 Right Click Menu
Click Pan/Tilt/Zoom, the interface is shown as below.
Figure 5-23 PAN/TILT/ZOOM Adjust
Here you can set the following items:
•
Step: value ranges from 1 to 9.
•
Zoom
•
Focus
•
Iris
Honeywell
Figure
5-21.
43