Hdd Installation - Honeywell HLVR4 User Manual

Installation and Connections

HDD Installation

1. Loosen the screws.
4. Install the first HDD. Note the
HDD is placed upside down.
Please make sure bracket is in
correct position.
7. Connect HDD cable to IDE
port。
14
is: 4 channels * 30 days * 12 hours * 200 M/h = 288G. So you need to
install one 300G HDD or 2 160G HDDs.
Data ribbons, fastening screws and smart HDD shelf design are already
provided in the accessories.
Please pay attention to HDD jumper:
If you just need to install one HDD, you can set the HDD to
MASTER.
Note
If you install two HDDs to one IDE port, you need to set the
farther one as MASTER and the other as SLAVE. Please
don't set HDD as CS Enable or Cap Limit.
Please follow the instructions below to install HDD.
2. Remove the unit cover.
5. Install the second HDD on
the bracket.
8. Connect power cord to the
HDD.
3. Dismantle the HDD bracket.
6. Fix the HDD bracket into the
internal unit.
9. Place the unit cover back
and screws firmly.