Factory Settings - NETGEAR Orbi RBS50Y User Manual

Factory Settings

The following table shows the factory default settings for the Orbi Outdoor Satellite.
Table 3. Factory default settings for the satellite
Feature
Router User login URL
login
User name (case-sensitive)
Default login password
(case-sensitive)
Internet WAN MAC address
connection
WAN MTU size
Port speed
Local LAN IP
network
Subnet mask
(LAN)
DHCP server
Time zone
Time zone adjusted for daylight
saving time
SNMP
Firewall Inbound (communications coming
in from the Internet)
Outbound (communications going
out to the Internet)
Source MAC filtering
WiFi WiFi communication
SSID name
Security
Broadcast SSID
Transmission speed
Country/region
RF channel
1
Maximum wireless signal rate derived from IEEE Standard 802.11 specifications. Actual throughput can vary. Network
conditions and environmental factors, including volume of network traffic, building materials and construction, and network
overhead, lower actual data throughput rate.
Orbi Outdoor Satellite
Default Setting
orbilogin.com
admin
password
Use default hardware address
1500
AutoSensing
192.168.1.250
255.255.255.0
Disabled
GMT for WW except NA and GR,
GMT+1 for GR, GMT-8 for NA
Disabled
Disabled
Disabled (except traffic on port
80, the HTTP port)
Enabled (all)
Disabled
Enabled
See satellite label
WPA2-PSK (AES)
Enabled
1
Auto
United States in the US
2.4 GHz front and back haul: Auto
5 GHz front haul: Channel 48
5 GHz back haul: Channel 157
Supplemental Information
27