Configuring Bfd Support For Static Routing - Cisco Catalyst 9500 series Configuration Manual

How to Configure Bidirectional Forwarding Detection
Step 7
Step 8
Step 9
Step 10
Step 11

Configuring BFD Support for Static Routing

Perform this task to configure BFD support for static routing. Repeat the steps in this procedure on each BFD
neighbor. For more information, see the "Example: Configuring BFD Support for Static Routing" section.
Procedure
Step 1
Routing Configuration Guide, Cisco IOS XE Everest 16.6.x (Catalyst 9500 Switches)
18
Command or Action
Example:
Device(config-if)# standby 1 ip 10.0.0.11
standby bfd
Example:
Device(config-if)# standby bfd
exit
Example:
Device(config-if)# exit
standby bfd all-interfaces
Example:
Device(config)# standby bfd
all-interfaces
exit
Example:
Device(config)# exit
show standby neighbors
Example:
Device# show standby neighbors
Command or Action
enable
Configuring Bidirectional Forwarding Detection
Purpose
(Optional) Enables HSRP support for BFD
on the interface.
Exits interface configuration mode.
(Optional) Enables HSRP support for BFD
on all interfaces.
Exits global configuration mode.
(Optional) Displays information about
HSRP support for BFD.
Purpose
Enables privileged EXEC mode.