3.
Scroll down to Library Flash Operation.
Figure 31
Updating firmware using the Remote Management Interface
4.
Select Flash Library from Remote File or Flash Library from Local File (see
Figure
31).
File.
Figure 32
Copying firmware using the Remote Management Interface
NOTE:
If you select Flash Library from Local File, the *.bin file must be copied from
ftp://ftp.hp.com/pub/products/storageworks/msl
library at the IP Address/upload. The level 1 password may be required to perform this procedure.
Figure 33
Confirming the Flash operation using the Remote Management Interface
Click Confirm to start the Flash operation. The library firmware automatically updates.
5.
42
Configuring the PTM
to the /upload directory, which is located on the