Using Hp Storageworks Library & Tape Tools; Updating Firmware Using The Remote Management Interface - HP StorageWorks MSL5000 series User Manual

Maintenance
Figure 77: Updating firmware using the Remote Management Interface
4. Select Flash Library from Remote File or Flash Library from Local File.
Note:
/upload directory, which is located on the library at the IP Address/upload.
5. Click Start the Flash. The library firmware automatically updates.
6. The library will reboot. Verify that the firmware level has been updated
Using HP StorageWorks Library & Tape Tools
HP StorageWorks Library & Tape Tools may already be installed on your host. If
not, you can download it from http://www.hp.com/support/tapetools.
Online help and instructions are included with the utility.
134
If you select Flash Library from Local File, the *.bin file must be copied to the
successfully by selecting the Library Info button from the View System
Data area of the GUI to view the Firmware Revision.
HP StorageWorks MSL5000 and MSL6000 Series Tape Libraries User Guide