Phasor Measurement Unit Records; Breaker Maintenance - GE L30 Instruction Manual

CHAPTER 6: ACTUAL VALUES
The represents the time the most recent samples were taken. It counts up at the defined sampling
NEWEST SAMPLE TIME
rate. If the data logger channels are defined, then both values are static.
See the
COMMANDS  CLEAR RECORDS

6.5.5 Phasor Measurement Unit records

ACTUAL VALUES  RECORDS  PMU RECORDS
 PMU
 RECORDS
The number of triggers applicable to the Phasor Measurement Unit recorder is indicated by the
The status of the phasor measurement unit recorder is indicated as follows.
ACTUAL VALUES  RECORDS  PMU RECORDS  PMU 1 RECORDING
 PMU 1
 RECORDING

6.5.6 Breaker maintenance

ACTUAL VALUES  RECORDS  MAINTENANCE  BREAKER 1(2)
 BREAKER 1

L30 LINE CURRENT DIFFERENTIAL SYSTEM – INSTRUCTION MANUAL
menu for clearing data logger records.
NUMBER OF TRIGGERS:

0
 PMU 1

 RECORDING
PMU 1 FORCE TRIGGER:

Yes
PUM 1 AVAILABLE

RECORDS: 0
PUM 1 SECONDS

PER RECORD: 0.0
PUM 1 LAST CLEARED:

2013/07/14 15:40:16
BKR 1 ACC ARCING AMP

φA: 0.00 kA2-cyc
BKR 1 ACC ARCING AMP

φB: 0.00 kA2-cyc
BKR 1 ACC ARCING AMP

φC: 0.00 kA2-cyc
BKR 1 OPERATING TIME

φA: 0 ms
BKR 1 OPERATING TIME

φB: 0 ms
BKR 1 OPERATING TIME

φC:
0 ms
BKR 1 OPERATING

TIME: 0 ms
BKR 1 ARCING AMP φA:

0.00 kA2-cyc
BKR 1 ARCING AMP φB:

0.00 kA2-cyc
BKR 1 ARCING AMP φC:

0.00 kA2-cyc
BKR 1 AMP MAX φA:

0.00 kA
Range: 0 to 65535 in steps of 1
See below
NUMBER OF TRIGGERS
Range: No, Yes
Range: 0 to 65535 in steps of 1
Range: 0 to 6553.5 in steps of 0.1
Range: YYYY/MM/DD HH:MM:SS
RECORDS
value.
6
6-27