Operation Volume Creation; Figure 5.8 Operation Volume Creation - Fujitsu ETERNUS AF250 S2 Configuration Manual

Chapter 5 General Settings
5.7 RAID Configuration Settings
A confirmation screen appears.
5
Click the [OK] button.
The RAID group is registered and the registration completion screen appears.
6
Click the [Done] button.
The screen display returns to the [RAID Group] screen.
7
After creating an operation RAID group, repeat
5.7.2

Operation Volume Creation

Create volumes (areas in the drives of a RAID group) in the RAID group.
Create a 1TB Standard volume in the operation RAID group created in

Figure 5.8 Operation Volume Creation

Operation RAID group (RG0)
3.84TB
3.84TB
RAID1+0 (2+2)
3.84TB
3.84TB
FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Configuration Guide (Basic)
Copyright 2017 FUJITSU LIMITED
Step 1 and later steps to create a backup RAID group.
"5.7.1 RAID Group Creation" (page
Operation volume
1TB
main
(Standard)
76
74).
P3AG-1832-04ENZ0