Mounting The Transmitter; Figure 2 - Stt750 With Adapter Housing - Horizontal Wall Mounting; Figure 3 - Stt750 Pipe Mount, Vertical - Honeywell STT750 Quick Start Installation Manual

SmartLine Temperature Transmitter

MOUNTING THE TRANSMITTER

Transmitter models can be attached to a two-inch (50 millimeter) vertical or horizontal
flat pipe using Honeywell's optional angle; alternately you can use your own bracket.
Honeywell's optional wall mounting bracket is also shown below:
For Housing with Adaptor refer to Honeywell drawings 50095917 (Flat pipe mount)
and 50095918 (Wall mount) for detailed mounting specifications.
For Housing without adaptor refer to Honeywell drawings 32306827 (No-Adaptor, Flat
pipe mount) and 32306828 (No-adaptor, Wall mount).
TRANSMITTER ENCLOSURE CAN BE ROTATED A TOTAL OF 90O FROM THE
STANDARD MOUNTING POSITION
Figure 2 – STT750 with adapter housing - Horizontal Wall Mounting
Figure 3 – STT750 Pipe Mount, Vertical
4 Quick Start Installation Guide