Connecting To A Virtual Private Network - Honeywell ScanPal EDA70 User Manual

Connecting to a virtual private network

The terminal supports connection to virtual private networks (VPN). This section describes
how to add and connect to VPN. To configure a VPN, users must consult your network
administrator. Users can view and change VPN settings in the Application Settings.
Note: Before accessing VPN, users need to set a lock screen password.
Add VPN
Before connecting to a VPN, users must first add the relevant information of the VPN.
1.
2.
3.
4.
5.
6.
Connect to VPN
1.
2.
3.
4.
5.
Edit VPN information
1.
2.
3.
4.
5.
6.
User Guide for ScanPal Series Terminal
Enter Application Settings screen.
Tap More under Wireless and Networks.
Tap VPN.
Tap Adding +.
Input the VPN information.
Tap Save, and VPN name will be displayed in the list.
Enter Application Settings screen.
Tap More under Wireless and Network.
Tap VPN.
Tap the VPN name in the list, and enter the certificate information based on the tips.
Tap Connect. The terminal gets connected to the VPN, and the status icons and
notification will be displayed. To disconnect from the VPN, tap the notification.
Enter Application Settings screen.
Tap More under Wireless and Network.
Tap VPN.
Long press the name of the VPN to be edited and select Editing Networks from the
list.
Edit VPN information based on your needs.
Tap Save after editing.
Chapter 6: Configuring Terminal
61