Changing Power Indicators - Honeywell ScanPal EDA70 User Manual

Chapter 1: Product Features of ScanPal Series EDA70-X Terminal

Changing power indicators

If the default indicators for battery charging (flashing green) is inappropriate for your
environment, you can change the indicator.
In addition to changing the default power indicator, you can also select:
• Default Battery LED
• No Battery LED
If you prefer the indicator to be solid amber and to change to solid green when in charging,
you need to perform Default Battery LED settings. If you prefer the indicator as message
notification (application or device management solution notification) indicator, you need to
select No Battery LED settings.
Default power indicator meanings
1. Tap Settings> Honeywell Battery LED
2. Select from the following options:
12
Connect to
Indicator status
power supply
No Flashing red
No No light
Yes Stable red
Yes Stable amber
Yes Stable green
• Default Battery LED
• HSM Battery LED (Factory settings)
• No Battery LED
Description
Battery power is less than 15% full
Battery power is 15% or more
Battery power is less than 15% full
Battery power is between 15% to 90%
full
Battery power is over 90% full
User Guide for ScanPal Series Terminal