Cisco 5520 Deployment Manual page 12

Cisco 5520 WLC Rear Panel View
The rear panel has the following interfaces:
1 Two Type A 3.0 USB ports
2 IMC port 10/100/1000 Base-T
To setup the CIMC interface:
• Connect the CIMC cable.
• To enable DHCP to set the IP, use the command imm dhcp enable.
• If DHCP is not available, use the command imm address <ip address> <net mask> <gateway ip>.
• To view the IP and details, use the command imm summary.
12