Table of Contents
Advertisement
FlexPower ONVIF Wire-Free IP Camera and Base Station User Manual
Enable or Disable Night Vision
The FlexPower camera includes an infrared (IR) illuminator to compensate for the lighting conditions, allowing
for night vision. By default, night vision is enabled but you can disable it.
To enable or disable night vision for a camera:
1.
Open a web browser from a computer or mobile device that is connected to the same LAN as the base
station.
If you are unable to connect to the same LAN using WiFi, use an Ethernet cable to connect a computer
to the same router or switch as the base station.
2.
Enter the domain name or IP address of the base station.
If you do not know the domain name or IP address, see
page 16.
A login window opens.
3.
Enter the base station password.
The password is the one that you specified the first time that you logged in. The password is
case-sensitive.
The Dashboard page displays.
4.
For the camera that you want to configure, click the Settings icon and select Video Settings.
The Video Settings page displays.
5.
Select or clear the Night Vision check box.
6.
Click the APPLY button.
Your settings are saved.
7.
Click the Close icon.
The Dashboard page displays.
Enable or Disable Image Rotation
You can rotate the camera image 180 degrees so that the image is upside down in relation to the normal
view.
To enable or disable image rotation a camera:
1.
Open a web browser from a computer or mobile device that is connected to the same LAN as the base
station.
If you are unable to connect to the same LAN using WiFi, use an Ethernet cable to connect a computer
to the same router or switch as the base station.
2.
Enter the domain name or IP address of the base station.
If you do not know the domain name or IP address, see
page 16.
A login window opens.
Access the Base Station for the First Time
Access the Base Station for the First Time
Manage Camera Settings
48
on
on
Advertisement
Table of Contents
