Security Levels - Canon Oce PlotWave 300 Administration Manual

Security levels

Security levels
Security levels presentation
Introduction
Océ defined 3 levels of security according to the customer needs. The presentation below can
help you to select the most suitable level.
High security level
The High level is the most secure mode for printing and scanning.
The compliant applications are based on:
• the LPR protocol for printing
• the HTTPS protocol (Océ PlotWave 900 only) for printing
• the FTP protocol for scanning.
Target:
• This level provides you the most secure mode while using the basic feature for printing and
scanning. Only some Océ applications are available. See the
application/functionality on page
• This security level may also be used when you want to be protected whenever a vulnerability
has been discovered and the corresponding patch cannot be yet installed. As soon as the patch
can be installed, you can go back to the original security level.
Medium security level
The Medium level is compliant with all the Océ applications available for printing and scanning
which do not present a high risk (as reported by most popular network scanners).
Target:
This level is recommended if you need to be secured while you want to use the Océ applications
for printing and/or scanning (you can use the system including more functions than with the High
security level).
Normal security level
This mode offers all the functionalities.
Target:
• You can select this level if you want to use some features not covered by MEDIUM security
level.
• This level is more dedicated for small network infrastructure where security is less required
versus features.
Set the security level in Océ PlotWave 300, Océ PlotWave 350 and Océ
ColorWave 300
Introduction
The [Security] wizard on the printer user panel gives the option to check or change the security
level of the system.
28 Chapter 2 - Security on Océ PlotWave 300/350, PlotWave 750, PlotWave 900 and ColorWave 300
21.
security levels supported per