Log Out - Canon Oce PlotWave 300 Administration Manual

Log out

Log out
Introduction
A session can be manually interrupted by a manual log out, or automatically interrupted by the
session time-out, in any conditions (normal working condition or in an error status).
A warning message announces the session time-out 10 seconds before the session closes.
When the session time-out expires the user session is automatically closed, even when a smart
card is inserted.
For security reasons, it is recommended to log out after the job completion, before leaving the
system place.
Log out after an authentication by login / password
On the system user panel, tap on the user name icon.
Confirm the log out.
Log out after an authentication by smart card
To log out, remove the smart card from the smart card reader.
NOTE
The session is automatically closed when the time-out occurs, even if the smart card is still in the
card reader.
Pull the card out of the reader and insert it again to start a new session.
Log out after an authentication by contactless card
On the system user panel, tap on the user name icon.
Confirm the log out.
Special cases: a time-out, pause, or error occurs
Introduction
Find below some cases where the time-out can interact with the behaviour of the system.
NOTE
The time-out starts when no operation is made on the printer panel.
A job remains 24 hours maximum in the system. After this period of time, the jobs that are not
processed are automatically deleted.
Time-out occurs or the user logs out
When the time-out occurs during a job (or when the user logs out):
192 Chapter 4 - Security on Océ PlotWave 345/365 and Océ PlotWave 450/550