Show Pool Ipv4 Name - Cisco ASR 9000 Series Command Reference Manual

show pool ipv4 name

show pool ipv4 name
To display the status of an IPv4 pool, use the show pool ipv4 name command in the EXEC mode.
show pool ipv4 name pool_name{location| verbose| }
Syntax Description
pool_name
location
verbose
|
Command Default
None
Command Modes
EXEC mode
Command History
Release
Release 4.2.0
Release 4.3.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes the proper task
IDs. If you suspect user group assignment is preventing you from using a command, contact your AAA
administrator for assistance.
Use thepool ipv4 command to enter Pool IPv4 configuration submode.
Task ID
Task ID
ip-services
Examples
This is the sample output of the show pool ipv4 name command:
RP/0/RSP0/CPU0:router# show pool ipv4 name POOL1
---------------------------------------------------
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference,
Release 5.2.x
98
Specifies the name of the IPv4 pool.
Specifies the location of the IPv4 pool.
Displays all allocations for the pools.
Specifies the output modifiers.
Pool POOL1 Allocations
Modification
This command was introduced.
Support for IPv6 was added.
Operation
read
Address Pool Service Commands