Specifications; Models And Their Standard Specifications - Toshiba Tosvert VF-S15 Instruction Manual

12. Specifications

12.1 Models and their standard specifications

 Standard specifications
Item
Input voltage
Applicable motor (kW)
Type
Form
Capacity (kVA) Note 1)
Rated output/current
(A) Note 2)
Output voltage Note 3)
Overload current rating
Voltage-frequency
Allowable fluctuation
Required Power supply
capacity (kVA) Note 5)
Protective method (IEC60529)
Cooling method
Color
Built-in filter
Item
Input voltage
Applicable motor (kW)
Type
Form
Capacity (kVA) Note 1)
Rated output current
(A) Note 2)
Rated output voltage Note 3)
Overload current rating
Voltage- frequency
Allowable fluctuation
Required Power supply
capacity (kVA) Note 5)
Protective method (IEC60529)
Cooling method
Color
Built-in filter
Note 1. Capacity is calculated at 220V for the 200V models, at 440V for the 400V models.
Note 2. Indicates rated output current setting when the PWM carrier frequency (parameter f300) is 4kHz or less. When
exceeding 4kHz, the rated output current setting is indicated in the parentheses. It needs to be further reduced for
PWM carrier frequencies above 12 kHz.
The rated output current is reduced even further for 400V models with a supply voltage of 480V or more.
The default setting of the PWM carrier frequency is 12kHz.
Note 3. Maximum output voltage is the same as the input voltage.
Note 4. At 180V-264V for the 200V models, at 342V-550V for the 400V models when the inverter is used continuously (load of
100%).
0.2 0.4 0.75
2002PM 2004PM 2007PM
0.6 1.3 1.8
1.5 3.3 4.8
(1.5) (3.3) (4.4)
Voltage 170V to 264V Note 4), frequency ±5%
0.8 1.4 2.5
Self-cooling
1-phase 200V
0.2 0.4 0.75 1.5 2.2
VFS15S
2002PL 2004PL 2007PL 2015PL 2022PL 4004PL 4007PL 4015PL 4022PL 4037PL 4055PL 4075PL 4110PL 4150PL
0.6 1.3 1.8 3.0 4.2
1.5 3.3 4.8 8.0 11.0
(1.5) (3.3) (4.4) (7.9) (10.0)
3-phase 200V to 240V
150％-60 seconds, 200%-0.5 second
1-phase 200V to 240V – 50/60Hz
Voltage 170V to 264V Note 4),
frequency±5％
0.8 1.4 2.3 4.0 5.4
IP20
Forced air-
Self-cooling
cooled
RAL7016
EMC filter
Specification
3-phase 200V
1.5 2.2 3.7
VFS15
2015PM 2022PM 2037PM 2055PM
3.0 4.2 6.7
8.0 11.0 17.5
(7.9) (10.0) (16.4)
3-phase 200V to 240V
150％-60 seconds, 200%-0.5 second
3-phase 200V to 240V - 50/60Hz
4.3 5.7 9.2
IP20
Forced air-cooled
RAL7016
Basic filter
Specification
3-phase 400V
0.4 0.75 1.5 2.2
1.1 1.8 3.1 4.2
1.5 2.3 4.1 5.5
(1.5) (2.1) (3.7) (5.0)
3-phase 380V to 500V
150％-60 seconds, 200% -0.5 second
3-phase 380V to 500V - 50/60Hz
Voltage 323V to 550V Note 4), frequency ±5%
1.6 2.7 4.7 6.4
Forced air-cooled
L-1
E6581926
5.5 7.5 11
2075PM 2110PM 2150PM
10.5 12.6 20.6 25.1
27.5 33.0 54.0 66.0
(25.0) (33.0) (49.0) (60.0)
13.8 17.8 24.3 31.6
3.7 5.5 7.5 11
VFS15
7.2 10.9 13.0 21.1
9.5 14.3 17.0 27.7
(8.6) (13.0) (17.0) (25.0)
10.0 15.2 19.5 26.9
IP20
RAL7016
EMC filter
15
15
25.1
33.0
(30.0)
34.9
12