Cisco GS7000 Installation And Configuration Manual page 35

Fastener
Seizure nut
RF cable connector*
Fiber optic cable connector
Note: The typical insertion force required for RF connectors and RF terminators is
20-30 lbsf. However, in some field situations the required insertion force can be
higher. RF Connector/Terminators used should be able to withstand at least 80
pounds of insertion force without damage to the center pin.
OL-29936-01
Torque Specification
2 to 5 ft-lbs
(2.7 to 6.8 Nm)
Per manufacturer
instructions
20 to 25 ft-lbs
(27.1 to 33.9 Nm)
Tools and Test Equipment
Illustration
13