Maytag MGR5870 User Manual page 19

To Cancel Self-Clean Cycle:
After Self-Cleaning
• Press CANCEL pad, About one hour after the end of the clean cycle, the LOCK
indicator word will turn off. At this point, the door can
• If the indicator word LOCK is NOT displayed, open
be opened.
oven door. If LOCK is displayed, allow oven to cool,
then open oven door. Some soil may leave a light gray, powdery ash which can
be removed with a damp cloth. If soil remains, it indicates
NOTE: Depending on the length of time the oven had
that the clean cycle was not long enough. The soil will be
been cleaning, it may take up to an hour for the oven
removed during the next clean cycle.
to cool down. When the oven is cool, the door will
automatically unlock and can be opened. If the oven racks were left in the oven and do not slide
smoothly after a clean cycle, wipe racks and embossed
If you wish to delay the start of cleaning: rack supports with a small amount of vegetable oil to re-
store ease of movement.
1-3. Follow preceding steps I-3.
A white discoloration may appear after cleaning if acid or
4. Press the STOP TIME pad. sugary foods were not wiped up before the clean cycle.
• STOP TIME will flash in the display and display will This discoloration is normal and will NOT affect perfor-
show calculated stop time based on the current time of mance.
day and the clean time previously entered. Fine lines may appear in the porcelain resulting from the
5. Press the appropriate number pads to enter the time you heating and cooling of the finish. This is normal and will
wish the oven to stop. A stop time can only be accepted for not affect performance.
later in the day.
EXAMPLE: If at 9:00 you set the oven to clean for
three hours, the calculated stop time would be"12:00".
NOTES...
• The first few times the oven is cleaned, some smoke and
odor may be detected. This is normal and will lessen or
disappear with use. If the oven is heavily soiled, or if the
broiler pan was accidentally left in the oven, excessive
smoke and odor may occur.
• If you want the stop time to be 1:00, press the number
pads "1,0,0". Four seconds later, the display will • As the oven heats and cools, you may hear sounds of
show 1:00 and the indicator word DELAY. metal parts expanding and contracting. This is normal
and will not damage your appliance.
• Slide-in models feature a cooling fan that automati-
cally turns on during the clean cycle and will auto-
matically turn offafter the clean cycle when the oven
6. When the oven begins to clean, the CLEAN symbol will has cooled.
light and DELAY will go off in the display.
7. When the clean time has been completed, the indicator
word CLEAN will turn off. The indicator word LOCK will
remain on until the oven has cooled. When the oven has
cooled, the indicator word LOCK will turn offand the door
will automatically unlock.
18