Casio KL-120TH User Manual page 25

Printer powers down while printing is in progress.
Possible Causes
Battery power is low Load a fresh set of AA-size alkaline
or the wrong type of batteries (supplied by you). Or use
batteries are loaded in the specified separately available AC
the printer. adaptor.
Ink ribbon is being fed from the tape outlet along with the tape.
Possible Causes
Tape cartridge loaded Remove the tape cartridge and check
while the ink ribbon is to make sure the ink ribbon is not
slack. broken. Next, take up any slack in the
ink ribbon and then reload the tape
cartridge.
Important!
Before loading a tape cartridge into
If the ink ribbon is broken, you must
 Tape Cutting
Cannot cut tape.
Possible Causes
Tape cutter blade is dull. Take the Label Printer to the dealer
from whom you purchased it to have
the tape cutter blade replaced.
Printed text is cut off by tape cut operation.
Possible Causes
Out of tape Replace the tape cartridge with a
new one.
24 EN
Action
Action
the Label Printer, always make sure
you take up any slack in the ink
ribbon first.
change to another tape cartridge.
Action
Action
 Using Labels
Page
Possible Causes
7
8
The backing paper is still
21
on the back of the tape.
Surface is unsuitable for
affixing a tape.
Page
9
Page
—
Page
9
Label will not adhere to a surface.
Action
Peel the backing paper from the back
of the tape to expose the adhesive.
Labels do not adhere well to surfaces
that are rough, wet, oily, or dirty.
Page
18
18