Sharp AY-X36RU Service Manual page 8

AY-X36RU
AE-X36RU
9. COMFORT button
Press this button to start COMFORT function and " " will be displayed on the remote controller. After this function is set, the
remote controller will send the detected ambient temperature to the controller and the unit will automatically adjust the indoor
temperature according to the detected temperature. Press this button again to cancel COMFORT function and " " will disappear.
● Please put the remote controller near user when this function is set. Do not put the remote controller near the object of high
temperature or low temperature in order to avoid detecting inaccurate ambient temperature.
10. DISPLAY Button
Press this button to turn off the display light on the indoor unit. "
again to turn on the display light. "
11. CLOCK Button
Press this button to set the clock time. "
the clock time. Each pressing of "▲" or "▼" button, clock time will increase or decrease 1 minute. If hold "▲" or "▼" button,
2seconds later, time will change quickly. Release this button when reaching your required time. Press "CLOCK" button to confirm
the time. " " icon stops blinking.
Note:
● Clock time adopts 24-hour mode.
● The interval between two operation can't exceeds 5seconds. Otherwise, remote controller will quit setting status. Operation for
TIMER ON/TIMER OFF is the same.
12. TIMER ON / TIMER OFF button
● TIMER ON button
"TIMER ON" button can set the time for timer on. After pressing this button, "
controller blinks. Press "▲" or "▼"button to adjust TIMER ON setting. After each pressing "▲" or "▼" button, TIMER ON setting
will increase or decrease 1min. Hold "▲" or "▼" button, 2seconds later, the time will change quickly until reaching your required
time. Press "TIMER ON" to confirm it. The word "ON" will stop blinking. "
the condition that TIMER ON is started up, press "TIMER ON" button to cancel it.
● TIMER OFF button
"TIMER OFF" button can set the time for timer off. After pressing this button,"
remote controller blinks. Press "▲" or "▼" button to adjust TIMER OFF setting. After each pressing "▲" or "▼" button, TIMER
OFF setting will increase or decrease 1min. Hold "▲" or "▼" button, 2seconds later, the time will change quickly until reaching
your required time. Press "TIMER OFF" word "OFF" will stop blinking. "
Under the condition that TIMER OFF is started up, press "TIMER OFF" button to cancel it.
Note:
● Under on and off status, you can set TIMER OFF or TIMER ON simultaneously.
● Before setting TIMER ON or TIMER OFF, please adjust the clock time.
● After starting up TIMER ON or TIMER OFF, set the constant circulating valid. After that, air conditioner will be turned on or
turned off according to setting time. ON/OFF button has no effect on setting. If you don't need this function, please use remote
controller to cancel it.
Function Buttons on the Remote Control
1. Energy-saving function (This function is not explained on the operation manual nor the catalogue)
Under cooling mode, press "TEMP" and "CLOCK" buttons simultaneously to start up or turn off the energy-saving function.
When the energy-saving function is started up, "SE" will be shown on remote controller, and air conditioner will adjust the
set temperature automatically according to ex-factory setting to reach to the best energy-saving effect. Press "TEMP" and
"CLOCK"buttons simultaneously again to exit energy-saving function.
Note:
● Under the energy-saving function, fan speed is defaulted at auto speed and it can't be adjusted.
● Under the energy-saving function, set temperature can't be adjusted. Press "TURBO" button and the remote controller won't
send signal.
● Sleep function and energy-saving function can't operate at the same time. If energy-saving function has been set under cooling
mode, press sleep button will cancel energy-saving function. If sleep function has been set under cooling mode, start up the
energy-saving function will cancel sleep function.
2. 8°C (46°F) heating function (This function is not explained on the operation manual nor the catalogue)
Under heating mode, press "TEMP" and "CLOCK" buttons simultaneously to start up or turn off the 8°C heating function. When
this function is started up, "
8°C. Press "TEMP" and "CLOCK" buttons simultaneously again to exit 8°C heating function.
Note:
● Under the 8°C heating function, fan speed is defaulted at auto speed and it can't be adjusted.
● Under the 8°C heating function, set temperature can't be adjusted. Press "TURBO" button and the remote controller won't send
signal.
● The sleep function and the 8°C heating function can't operate at the same time. If 8°C heating function has been set under
cooling mode, press
the 8°C heating function will cancel sleep function.
" icon is displayed.
" icon on the remote controller will blink. Press "▲" or "▼" button within 5seconds to set
" and "8°C" will be shown on the remote controller, and the air conditioner keep the heating status at
sleep button will cancel 8°C heating function. If sleep function has been set under cooling mode, start up
" icon on the remote controller disappears. Press this button
" icon disappears and the word "ON" on remote
" icon resumes displaying. Cancel TIMER ON: Under
" icon disappears and the word "OFF" on
" icon resumes displaying. Cancel TIMER OFF.
8