Sharp AY-X36RU Service Manual page 37

7. Remove the three (3) screws fixing the control box cover.
8. Cut the three (3) fixing bands.
9. Disconnect the connectors.
9-1. Disconnect the seven (7) connectors.
9-2. Disconnect the four (4) connectors.
9-3. Disconnect the six (6) connectors.
9-4. Disconnect the three (3) connectors after removing the
lock part.
10. Remove the nine (9) screws fixing the PWB.
11. Loosen the three (3) fixing bands fixing the lead wire.
12. Cut the fixing band and unscrew the two (2) screws
37
AY-X36RU
AE-X36RU