Table of Contents
Advertisement
Rear Panel
PORT/CONNECTOR
1
TEL 1
TEL 2
2
ETHERNET
3
RESET
4
CABLE
5
POWER
MAC Label
The SVG1202 Media Access Control (MAC) label is located on the bottom of the gateway. It contains
specific ID information for the gateway.
To receive data service, you may have to provide the MAC address (HFC MAC ID) and serial number
located on the label to your Internet service provider.
To receive VoIP service, you may have to provide the MTA MAC ID to your VoIP provider.
SVG1202 Wireless Voice Gateway • User Guide
DESCRIPTION
VoIP connection for a single or two-line telephone
VoIP connection for a single-line telephone
Ethernet port for an RJ-45 cable connection
Resets the gateway; may take from 5 to 30 minutes to
scan and connect to the appropriate communications
channels
Press and hold the RESET switch for five seconds or
longer to restore the factory default settings
Coaxial cable connector
+12VDC Power connector
B
3
Advertisement
Table of Contents
