Rear Panel Overview - Motorola SURFboard SVG1501 Series User Manual

Rear Panel Overview

The SVG1501 rear panel contains the following cabling port and connectors:
Key Item
1 TEL1/2
TEL 2
2 ETHERNET
1 2 3 4
3 RESET
1 • Overview
This document is uncontrolled pending incorporation in a Motorola CMS
Description
VoIP connection for a single or two-line telephone
VoIP connection for a single telephone
Use any Ethernet port to connect an Ethernet-equipped computer, hub,
bridge, or switch using an RJ-45 cable.
Activity LED - Green LED defines the activity of the Ethernet
connector.
When LED is ON, this indicates that there is no data traffic and a
connection is stabilized.
When LED is FLASHING, this indicates that there is data being
transmitted upstream or downstream.
When LED is OFF, this indicates that the unit is not powered or there is
no Ethernet connection.
10/100 LED - Indicates the connection data rate.
When Green LED is ON, this indicates that the connection is connected
at a 100BaseT data rate.
When Amber LED is ON, this indicates that the connection is at a
10BaseT rate.
Resets the voice modem, which may take from five to 30 minutes to
find and lock on the appropriate communications channels.
14