Table of Contents
Advertisement
Changing the SVG1202 Default Password
To prevent unauthorized configuration, immediately change the default password
when you first configure the gateway.
1. From the Status Security page, click Security from the Status menu options.
2. Complete each field entry, but note the following:
• Password Change Username is your new user name.
• New Password is case sensitive.
• Current Username Password is your old password.
3. Select No for Restore Factory Defaults.
4. Click Apply to update the user name and password.
Restoring Factory Defaults
Note: After applying the restore factory settings change, you will have to log in using the default user
name and password.
Under Restore Factory Defaults, select Yes.
1. Click Apply to reset the user name and password to the original factory settings.
2. Log in again using the following defaults. Note that both entries are case-sensitive.
User name:
admin
Password:
motorola
Getting Help
To retrieve help information for any menu option, click help on that page.
Exiting the SVG1202 Configuration Manager
To log off and close the SVG1202 Configuration Manager:
•
Click Logout on the SVG1202 Menu Options bar.
SVG1202 Wireless Voice Gateway • User Guide
B
13
Advertisement
Table of Contents
